- Bearings Catalog
- >
- Spherical Plain Bearings
- >
- Steel on PTFE Fabric Material - Inch and Metric Series
- >
- Metric Series
- >
- GE100ET-2RS
- This spherical plain bearing has a single fractured chrome steel outer ring with a PTFE fabric liner, the inner ring is chrome plated.
- This bearing has two plastic seals.
- This is a maintenance free bearing with a PTFE fabric liner and a hard chrome plated ball, lubrication is not recomended.
- The bearing must be protected from dirt and contamination.
Product Details
Specifications | ||
Bearing Type | single fracture - sealed | |
Bore Dia (d) | 100.000 | mm |
Outer Dia (D) | 150.000 | mm |
Dynamic Load Rating (Cr) | 1,070,000 | N |
Static Load Rating (Cor) | 2,570,000 | N |
Outer Width (Bo) | 55.000 | mm |
Inner Width (Bi) | 70.000 | mm |
Max. shaft corner radius, or 45 deg. chamfer (ch1) | 1.00 | mm |
Max. housing corner radius, or 45 deg. chamfer (ch) | 1.00 | mm |
Spherical Diameter (dk or Dk) | 130.00 | mm |
Mis-alignment Angle (a deg.) | 7 | |
Weight (g) | 4,440.00 | grams |
Material | Inner ring and outer ring are made from 52100 chrome steel, or equivalent |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.