- Bearings Catalog
- >
- Spherical Plain Bearings
- >
- Steel on PTFE Composite Material - Metric Series
- >
- Inner/Outer Lubrication
- >
- GEH480HCS
- This spherical plain bearing has a two piece carbon steel outer ring with a PTFE composite liner, split circumfrentially, held together with screws, the inner ring is chrome plated.
- This spherical plain bearing requires grease lubrication. The inner ring / outer ring have a groove and holes.
- The bearing must be protected from dirt and contamination.
Product Details
Specifications | ||
Bearing Type | standard | |
Bore Dia (d) | 480.000 | mm |
Outer Dia (D) | 680.000 | mm |
Dynamic Load Rating (Cr) | 19,930,000 | N |
Static Load Rating (Cor) | 39,860,000 | N |
Outer Width (Bo) | 320.000 | mm |
Inner Width (Bi) | 340.000 | mm |
Max. shaft corner radius, or 45 deg. chamfer (ch1) | 2.00 | mm |
Max. housing corner radius, or 45 deg. chamfer (ch) | 5.00 | mm |
Spherical Diameter (dk or Dk) | 623.00 | mm |
Mis-alignment Angle (a deg.) | 2 | |
Weight (g) | 463,000.00 | grams |
Material | Outer ring made from carbon steel, inner ring 52100 chrome steel or equivalent |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.