- Bearings Catalog
- >
- Spherical Plain Bearings
- >
- Steel Outer w/ Copper Alloy Inner - Metric Series
- >
- GEH630HF/Q
- This spherical plain bearing has a two piece carbon steel outer ring with hard chrome plating inside, split circumfrentially, held together with screws, the inner ring is made from a copper alloy and has plugs of solid lubricant.
- This spherical plain bearing requires grease lubrication upon initial installation.
- The bearing must be protected from dirt and contamination.
Product Details
Specifications | ||
Bearing Type | higher capacity | |
Bore Dia (d) | 630.000 | mm |
Outer Dia (D) | 900.000 | mm |
Dynamic Load Rating (Cr) | 34,550,000 | N |
Static Load Rating (Cor) | 69,100,000 | N |
Outer Width (Bo) | 425.000 | mm |
Inner Width (Bi) | 450.000 | mm |
Max. shaft corner radius, or 45 deg. chamfer (ch1) | 3.00 | mm |
Max. housing corner radius, or 45 deg. chamfer (ch) | 6.00 | mm |
Spherical Diameter (dk or Dk) | 813.00 | mm |
Mis-alignment Angle (a deg.) | 2 | |
Weight (g) | 1,072,000.00 | grams |
Material | Outer ring made carbon steel, Inner ring made from a copper alloy |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.