- Bearings Catalog
- >
- Spherical Plain Bearings
- >
- Thrust Loading - Steel, PTFE Fabric, PTFE Plastic: Metric
- >
- GX260T
- This spherical plain bearing has a PTFE fabric liner, the inner ring is hard chrome plated on the sliding surface.
- The load ratings given are for axial loading.
- The bearing must be protected from dirt and contamination.
Product Details
Specifications | ||
Bearing Type | steel-on-PTFE fabric | |
Bore Dia (d) | 260.000 | mm |
Outer Dia (D) | 430.000 | mm |
Dynamic Load Rating (Cr) | 6,190,000 | N |
Static Load Rating (Cor) | 17,510,000 | N |
Width (B) | 115.000 | mm |
Outer Width (Bo) | 80.000 | mm |
Inner Width (Bi) | 95.000 | mm |
Max. Shaft Shoulder Dia. Inner (Li) | 409 | mm |
Max. Shaft Shoulder Dia. Inner (Ui) | 336.0 | mm |
Min. Housing Shoulder Dia., Outer (Uo) | 317.00 | mm |
Max. shaft corner radius, or 45 deg. chamfer (ch1) | 1.50 | mm |
Max. housing corner radius, or 45 deg. chamfer (ch) | 1.50 | mm |
Spherical Diameter (dk or Dk) | 449.00 | mm |
Mis-alignment Angle (a deg.) | 7 | |
Spherical Center Location (S) | 83 | mm |
Thread Length (l1) | 82.50 | mm |
Bore Center to End of Rod (h) | 82.50 | mm |
Rod Overall Length (l2) | 82.50 | mm |
Weight (g) | 71,300.00 | grams |
Material | 52100 Chrome steel, or equivalent |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.