- Bearings Catalog
- >
- Pillow Blocks, Flanges, Take Up Units and Bearing Inserts
- >
- Two Bolt Pillow Blocks - Set Screw or Locking Collar, Standard, Low Profile, Thermoplastic or Economy Series, Normal or Wide Inner - Inch and Metric
- >
- Inch Series
- >
- BS206-18S
- This bearing design does not have a grease fitting.
Product Details
| Specifications | ||
| Bearing Type | Stamped steel housing pillow block | |
| Dynamic Load Rating (Cr) | 4,300 | lbs |
| Static Load Rating (Cor) | 2,500 | lbs |
| Shaft Height (h) | 1.3120 | in |
| Housing Width (b) | 1.5000 | in |
| Mounting Hole Center-to-Center (e) | 3.7400 | in |
| Housing Length (a) | 4.6100 | in |
| Housing Base Thickness (g) | 0.1600 | in |
| Housing Height (w) | 2.6200 | in |
| Bearing Number | SB206-18S | |
| Housing Number | BS206 | |
| Mounting Hole Dia. (s) | 0.4300 | in |
| Inner Race Extension (E) | 1.6100 | in |
| Shaft Dia., Nominal (d) | 1.1250 | in |
| Shaft Size (ds) | 1.125 | |
| Weight (g) | 700.00 | grams |
| Material | Zinc plated carbon steel, chrome steel bearing | |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.