Back

Main Menu

Request A Quote Contact Us

Your browser is out of date.

You are currently using Internet Explorer 7/8/9, which is not supported by our site. For the best experience, please use one of the latest browsers.

banner
S1PP7-4 collar clamp ball bearing drawings
  1. The bearing does not come with a retaining ring.
  2. Bore tolerance = +0000" / -.0005"
  3. Outside diameter tolerance = .0000" / -.0004"
  4. Outer race width tolerance = .000" / -.005"
  5. Inner race width tolerance = .000" / -.005"
  6. All tolerances ABEC 1 except where noted.
  7. Two rubber seals
  8. Mating shaft recommended tolerance: +.0000" / -.0005"

S1PP7-4 Collar Clamp Ball Bearing

Model: S1PP7-4

Request Quote Quantity

Product Details

Specifications
Bearing Type no snap ring
Bore Dia (d) 0.1875 in
Outer Dia (D) 0.6250 in
Outer Width (Bo) 0.1960 in
Inner Width (Bi) 0.4219 in
Dynamic Load Rating (Cr) 168 lbs
Static Load Rating (Cor) 77 lbs
Collar Width (i) 0.1880 in
Bearing Collar Outside Dia. (J) 0.5630 in
Bearing Collar Set Screw (L) 4-40 UNC
Material 52100 chrome steel, or equivalent
Documentation
General
Nomenclature
Material
Closures and Seals
Cages and Retainers
Tolerances and Precision
Internal Clearance
Lubrication
Fitting and Mounting
Load and Life Calculation Information
eDrawings file (.ePRT, eASM)

All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.