- The maximum recommended angular misalignment is 4 degrees. When the bearing is misaligned, the applied dynamic radial load must be less than 10% of the dynamic capacity.
- This bearing is also available with a tapered bore, add a suffix "K" after the four digit number.
|Bearing Type||double row self-aligning|
|Bore Dia (d)||105.000||mm|
|Outer Dia (D)||190.000||mm|
|Radius (min) (rs)||2.10||mm|
|Dynamic Load Rating (Cr)||75,000||N|
|Static Load Rating (Cor)||32,500||N|
|Max Speed (Grease)||3,000||rpm|
|Max Speed (Oil)||3,600||rpm|
|Max. Shaft Shoulder Dia. Inner (Li)||116||mm|
|Min. Housing Shoulder Dia., Outer (Lo)||179||mm|
|Material||52100 Chrome steel (or equivalent)|
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.