- Bearings Catalog
- >
- Spherical Plain Bearings
- >
- Steel on Steel Double Direction Thrust - Inch
- >
- GEGZ44HS/K
- This bearing is designed for applications with radial loading and higher axial thrust loading, with only a small amount of misalignment.
- The inner and outer rings are coated with molybdenum disulphide for reduced sliding friction.
- These outer race assembly consists of two races and one spacer.
- This spherical plain bearing has grooves and thru holes for relubrication.
- This spherical plain bearing must be properly lubricated with grease.
Product Details
Specifications | ||
Bearing Type | double direction thrust | |
Bore Dia (d) | 1.7500 | in |
Outer Dia (D) | 3.1875 | in |
Width (B) | 2.0200 | in |
Outer Width (Bo) | 0.9200 | in |
Inner Width (Bi) | 1.8200 | in |
Dynamic Load Rating (Cr) | 40,463 | lbs |
Static Load Rating (Cor) | 161,852 | lbs |
Max. shaft corner radius, or 45 deg. chamfer (ch1) | 0.060 | in |
Max. housing corner radius, or 45 deg. chamfer (ch) | 0.140 | in |
Spherical Diameter (dk or Dk) | 2.874 | in |
Lubrication Groove Location (A) | 0.375 | in |
Weight (g) | 976.00 | grams |
Material | 52100 Chrome steel, or equivalent |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.