- Bearings Catalog
- >
- Bushings
- >
- ASTEPB Injection Molded Thermoplastic Series - Metric
- >
- ASTEPBF 2528-16
- This bearing can operate dry or with lubrication.
- Please review the technical information on the requirements for the mating shaft.
- See the ASTEPB Product information for the available materials.
- Recommended fitting tolerance: Housing = H7, Shaft = h9,
Product Details
| Specifications | ||
| Bearing Type | flanged | |
| Shaft Dia., Nominal (d) | 25.000 | mm |
| Bearing Outside Diameter, Nominal(Do) | 28.00 | mm |
| Bearing Bore after Mounting (di) | 25.124 - 25.04 | |
| Bearing Length, Nominal (B) | 16.00 | mm |
| OD Chamfer Length (Co) | 0.80 | mm |
| Flange Dia. (Dfl pm 0.5) | 35.00 | mm |
| Flange Thickness (Sfl) | 1.50 | mm |
| Material | Molded plastic with self lubricating resins. | |
All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.