S3PPG16 collar clamp ball  bearing drawings
  1. The bearing comes with a retaining ring.
  2. Bore tolerance = +0000" / -.0005"
  3. Outside diameter tolerance = .0000" / -.0004"
  4. Outer race width tolerance = .000" / -.005"
  5. Inner race width tolerance = .000" / -.005"
  6. All tolerances ABEC 1 except where noted.
  7. Two rubber seals
  8. Mating shaft recommended tolerance: +.0000" / -.0005"

S3PPG16 Collar Clamp Ball Bearing

Model: S3PPG16

Request Quote Quantity

Product Details

Specifications
Bearing Type with snap ring
Bore Dia (d) 0.3125 in
Outer Dia (D) 0.8750 in
Outer Width (Bo) 0.2812 in
Inner Width (Bi) 0.5625 in
Dynamic Load Rating (Cr) 575 lbs
Static Load Rating (Cor) 305 lbs
Collar Width (i) 0.2500 in
Bearing Collar Outside Dia. (J) 0.7810 in
Bearing Collar Set Screw (L) 8-36 UNF
Snap Ring Dia. (G) 0.9840 in
Snap Rinf Location (Sd) 0.9000 in
Snap Ring Thickness (I) 0.0260 in
Material 52100 chrome steel, or equivalent

All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.