GEH420HC spherical plain radial bearing drawings
  1. This spherical plain bearing has a two piece carbon steel outer ring with a PTFE composite liner, split circumfrentially, held together with screws, the inner ring is chrome plated.
  2. This spherical plain bearing requires grease lubrication. The outer ring has a groove and holes.
  3. The bearing must be protected from dirt and contamination.

GEH420HC Metric Series Steel on PTFE Composite Material Spherical Plain Bearing

Model: GEH420HC

Request Quote Quantity

Product Details

Specifications
Bearing Type standard
Bore Dia (d) 420.0000 in
Outer Dia (D) 600.0000 in
Outer Width (Bo) 280.0000 in
Inner Width (Bi) 300.0000 in
Dynamic Load Rating (Cr) 14,950,000 N
Static Load Rating (Cor) 29,900,000 N
Max. shaft corner radius, or 45 deg. chamfer (ch1) 1.500 in
Max. housing corner radius, or 45 deg. chamfer (ch) 4.000 in
Spherical Diameter (dk or Dk) 534.000 in
Mis-alignment Angle (a deg.) 2
Weight (g) 319,000.00 grams
Material Outer ring made from carbon steel, inner ring 52100 chrome steel or equivalent

All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.