GAC105T spherical plain  bearing drawings
  1. This spherical plain bearing has a PTFE fabric liner, the inner ring is hard chrome plated on the sliding surface.
  2. A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.
  3. The bearing must be protected from dirt and contamination.

GAC105T Metric Series Angular Contact Spherical Plain Bearing

Model: GAC105T

Request Quote Quantity

Product Details

Bearing Type steel-on-PTFE fabric
Bore Dia (d) 105.000 mm
Outer Dia (D) 160.000 mm
Width (B) 35.000 mm
Outer Width (Bo) 32.500 mm
Inner Width (Bi) 35.000 mm
Dynamic Load Rating (Cr) 740,000 N
Static Load Rating (Cor) 1,850,000 N
Max. shaft corner radius, or 45 deg. chamfer (ch1) 2.00 mm
Max. housing corner radius, or 45 deg. chamfer (ch) 2.00 mm
Spherical Diameter (dk or Dk) 148.00 mm
Mis-alignment Angle (a deg.) 2
Spherical Center Location (S) 12 mm
Thread Length (l1) 12.30 mm
Bore Center to End of Rod (h) 12.30 mm
Rod Overall Length (l2) 12.30 mm
Weight (g) 2,930.00 grams
Material 52100 Chrome steel, or equivalent

All information in this catalog has been thoroughly checked for accuracy. However, the catalog data should not be relied upon entirely for design and development purposes. AST Bearings assumes no liability for possible errors or omissions. All dimensions and specifications are subject to change without notice. Contact AST Bearings for the most current catalog data as it applies to you and for your application.