Category: Flangette Series
- Bore tolerance = +0000" / -.0005"
- All tolerances ABEC 1 except where noted.
- Two rubber seals
- Mating shaft recommended tolerance: +.0000" / -.0005"
- The flangette bearing is designed for only a small amount of bearing mis-alignment.
- The bearing is not designed to rotate in the housing once the flangette is installed.
|Bore Dia (d)||0.5000|
|Dynamic Load Rating (Cr)||885|
|Static Load Rating (Cor)||505|
|Flangette Width ( C )||1.4400|
|Flangette Length ( A )||2.3400|
|Mounting Hole Centers (D)||1.7800|
|Mounting Hole Dia. (E)||0.2190|
|Flangette Assembly Height (F)||0.6250|
|Backside Distance (G)||0.1200|
|Flange Material Thickness (H)||0.0360|
|Bearing Collar Outside Dia. (J)||0.9100|
|Flangette Assembly Width (K)||0.3100|
|Bearing Collar Set Screw (L)||8-36 UNF|
|Frame Hole Minimum Dia. (M)||1.2800|
|Material||52100 chrome steel, or equivalent|
|Closures and Seals|
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.