Home » Bearings Catalog » Pillow Blocks, Flanges, Take Up Units and Bearing Inserts » Flangette Series » S3PPB5ST

S3PPB5ST

Category: Flangette Series





(Qty)
  1. Bore tolerance = +0000" / -.0005"
  2. All tolerances ABEC 1 except where noted.
  3. Two rubber seals
  4. Mating shaft recommended tolerance: +.0000" / -.0005"
  5. The flangette bearing is designed for only a small amount of bearing mis-alignment.
  6. The bearing is not designed to rotate in the housing once the flangette is installed.
Attributes Values
Bearing Type flangette
Bore Dia (d) 0.3750
Dynamic Load Rating (Cr) 575
Static Load Rating (Cor) 305
Flangette Width ( C ) 1.1900
Flangette Length ( A ) 2.0900
Mounting Hole Centers (D) 1.5300
Mounting Hole Dia. (E) 0.2190
Flangette Assembly Height (F) 0.5620
Backside Distance (G) 0.1070
Flange Material Thickness (H) 0.0330
Bearing Collar Outside Dia. (J) 0.7800
Flangette Assembly Width (K) 0.2800
Bearing Collar Set Screw (L) 8-36 UNF
Frame Hole Minimum Dia. (M) 1.0900
Material 52100 chrome steel, or equivalent
Additional Information
Material
Closures and Seals
Lubrication
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.