Home » Bearings Catalog » Pillow Blocks, Flanges, Take Up Units and Bearing Inserts » Flangette Series » S1PPB73ST

S1PPB73ST

Category: Flangette Series





(Qty)
  1. Bore tolerance = +0000" / -.0005"
  2. All tolerances ABEC 1 except where noted.
  3. Two rubber seals
  4. Mating shaft recommended tolerance: +.0000" / -.0005"
  5. The flangette bearing is designed for only a small amount of bearing mis-alignment.
  6. The bearing is not designed to rotate in the housing once the flangette is installed.
Attributes Values
Bearing Type flangette
Bore Dia (d) 0.2500
Dynamic Load Rating (Cr) 168
Static Load Rating (Cor) 77
Flangette Width ( C ) 0.8750
Flangette Length ( A ) 1.7800
Mounting Hole Centers (D) 1.2200
Mounting Hole Dia. (E) 0.2190
Flangette Assembly Height (F) 0.4300
Backside Distance (G) 0.0790
Flange Material Thickness (H) 0.0270
Bearing Collar Outside Dia. (J) 0.5600
Flangette Assembly Width (K) 0.2200
Bearing Collar Set Screw (L) 4-40 UNC
Frame Hole Minimum Dia. (M) 0.7800
Material 52100 chrome steel, or equivalent
Additional Information
Material
Closures and Seals
Lubrication
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.