Home » Bearings Catalog » Spherical Plain Bearings » Steel on Steel Double Direction Thrust - Inch » GEGZ44HS/K


Category: Steel on Steel Double Direction Thrust - Inch

  1. This bearing is designed for applications with radial loading and higher axial thrust loading, with only a small amount of misalignment.
  2. The inner and outer rings are coated with molybdenum disulphide for reduced sliding friction.
  3. These outer race assembly consists of two races and one spacer.
  4. This spherical plain bearing has grooves and thru holes for relubrication.
  5. This spherical plain bearing must be properly lubricated with grease.
Attributes Values
Bearing Type double direction thrust
Bore Dia (d) 1.7500
Outer Dia (D) 3.1875
Width (B) 2.0200
Outer Width (Bo) 0.9200
Inner Width (Bi) 1.8200
Dynamic Load Rating (Cr) 40,463
Static Load Rating (Cor) 161,852
Max. shaft corner radius, or 45 deg. chamfer (ch1) 0.060
Max. housing corner radius, or 45 deg. chamfer (ch) 0.140
Spherical Diameter (dk or Dk) 2.874
Lubrication Groove Location (A) 0.375
Weight (g) 976.00
Material 52100 Chrome steel, or equivalent
Additional Information
Tolerances and Precision
Internal Clearance
Fitting and Mounting
Load and Life Calculation Information
eDrawings file (.ePRT, eASM)
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.