Home » Bearings Catalog » Spherical Plain Bearings » Steel on PTFE Fabric Material - Inch and Metric Series » Metric Series » GEG90ET-2RS

GEG90ET-2RS

Category: Metric Series





(Qty)
  1. This spherical plain bearing has a single fractured chrome steel outer ring with a PTFE fabric liner, the inner ring is chrome plated.
  2. This bearing has two plastic seals.
  3. This is a maintenance free bearing with a PTFE fabric liner and a hard chrome plated ball, lubrication is not recomended.
  4. The bearing must be protected from dirt and contamination.
Attributes Values
Bearing Type single fracture - sealed, high mis-alignment
Bore Dia (d) 90.0000
Outer Dia (D) 150.0000
Outer Width (Bo) 55.0000
Inner Width (Bi) 85.0000
Dynamic Load Rating (Cr) 1,070,000
Static Load Rating (Cor) 2,570,000
Max. shaft corner radius, or 45 deg. chamfer (ch1) 1.000
Max. housing corner radius, or 45 deg. chamfer (ch) 1.000
Spherical Diameter (dk or Dk) 130.000
Mis-alignment Angle (a deg.) 15
Weight (g) 5,500.00
Material Inner ring and outer ring are made from 52100 chrome steel, or equivalent
Additional Information
General
Nomenclature
Material
Tolerances and Precision
Internal Clearance
Lubrication
Fitting and Mounting
Load and Life Calculation Information
eDrawings file (.ePRT, eASM)
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.