Category: Steel on Bronze - Metric Series
- This spherical plain bearing has solid carbon steel outer ring with bronze liner, the inner ring is hard chrome plated.
- This spherical plain bearing requires grease lubrication. The outer ring has a groove and holes.
- The bearing must be protected from dirt and contamination.
|Bearing Type||bronze-on-steel radial|
|Bore Dia (d)||6.0000|
|Outer Dia (D)||18.0000|
|Outer Width (Bo)||6.7500|
|Inner Width (Bi)||9.0000|
|Dynamic Load Rating (Cr)||4,300|
|Static Load Rating (Cor)||9,800|
|Max. shaft corner radius, or 45 deg. chamfer (ch1)||0.300|
|Max. housing corner radius, or 45 deg. chamfer (ch)||0.300|
|Spherical Diameter (dk or Dk)||12.700|
|Mis-alignment Angle (a deg.)||13|
|Material||Outer ring - Carbon steel with bronze liner, Inner ring - 52100 chrome steel or equivalent with hard chrome plating|
|Tolerances and Precision|
|Fitting and Mounting|
|Load and Life Calculation Information|
|eDrawings file (.ePRT, eASM)|
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.