Home » Bearings Catalog » Spherical Plain Bearings » Angular Contact - Steel, PTFE Fabric, PTFE Plastic: Inch and Metric » Metric Series » GAC80S


Category: Metric Series

  1. The inner and outer rings are coated with molybdenum disulphide for reduced sliding friction.
  2. This spherical plain bearing has an outer ring groove and thru holes for relubrication.
  3. This spherical plain bearing has two crossed grooves on the load face of the outer ring to enhance the spreading of the grease lubrication.
  4. This spherical plain bearing must be properly lubricated with grease.
  5. A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.
Attributes Values
Bearing Type steel-on-steel
Bore Dia (d) 80.0000
Outer Dia (D) 125.0000
Width (B) 29.0000
Outer Width (Bo) 25.5000
Inner Width (Bi) 29.0000
Dynamic Load Rating (Cr) 258,000
Static Load Rating (Cor) 1,290,000
Max. shaft corner radius, or 45 deg. chamfer (ch1) 1.100
Max. housing corner radius, or 45 deg. chamfer (ch) 1.100
Spherical Diameter (dk or Dk) 115.000
Mis-alignment Angle (a deg.) 3.5
Lubrication Groove Location (A) 14.500
Spherical Center Location (S) 9
Weight (g) 1,540.00
Material 52100 Chrome steel, or equivalent
Additional Information
Tolerances and Precision
Internal Clearance
Fitting and Mounting
Load and Life Calculation Information
eDrawings file (.ePRT, eASM)
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.