Category: Metric Series
- This spherical plain bearing has a PTFE plastic liner, the inner ring is hard chrome plated on the sliding surface.
- A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.
- The bearing must be protected from dirt and contamination.
|Bearing Type||steel-on-PTFE plastic|
|Bore Dia (d)||45.0000|
|Outer Dia (D)||75.0000|
|Outer Width (Bo)||18.0000|
|Inner Width (Bi)||20.0000|
|Dynamic Load Rating (Cr)||43,000|
|Static Load Rating (Cor)||69,000|
|Max. shaft corner radius, or 45 deg. chamfer (ch1)||1.000|
|Max. housing corner radius, or 45 deg. chamfer (ch)||1.000|
|Spherical Diameter (dk or Dk)||68.500|
|Mis-alignment Angle (a deg.)||3|
|Spherical Center Location (S)||4|
|Material||52100 Chrome steel, or equivalent|
|Tolerances and Precision|
|Fitting and Mounting|
|Load and Life Calculation Information|
|eDrawings file (.ePRT, eASM)|
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.