Home » Bearings Catalog » Spherical Plain Bearings » Angular Contact - Steel, PTFE Fabric, PTFE Plastic: Inch and Metric » Metric Series » GAC25N


Category: Metric Series

  1. This spherical plain bearing has a PTFE plastic liner, the inner ring is hard chrome plated on the sliding surface.
  2. A single bearing can only accept axial loading in one direction. A pair of opposing bearings are required for radial loading and bi-direction axial loading.
  3. The bearing must be protected from dirt and contamination.
Attributes Values
Bearing Type steel-on-PTFE plastic
Bore Dia (d) 25.0000
Outer Dia (D) 47.0000
Width (B) 15.0000
Outer Width (Bo) 14.0000
Inner Width (Bi) 15.0000
Dynamic Load Rating (Cr) 20,000
Static Load Rating (Cor) 32,000
Max. shaft corner radius, or 45 deg. chamfer (ch1) 1.000
Max. housing corner radius, or 45 deg. chamfer (ch) 1.000
Spherical Diameter (dk or Dk) 42.000
Mis-alignment Angle (a deg.) 2.5
Spherical Center Location (S) 1
Weight (g) 148.00
Material 52100 Chrome steel, or equivalent
Additional Information
Tolerances and Precision
Internal Clearance
Fitting and Mounting
Load and Life Calculation Information
eDrawings file (.ePRT, eASM)
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.