Category: ASTEPB Injection Molded Thermoplastic Series - Metric
- This bearing can operate dry or with lubrication.
- Please review the technical information on the requirements for the mating shaft.
- See the ASTEPB Product information for the available materials.
- Recommended fitting tolerance: Housing = H7, Shaft = h9,
|Shaft Dia., Nominal (d)||6.0000|
|Bearing Outside Diameter, Nominal(Do)||8.000|
|Bearing Bore after Mounting (di)||6.068 - 6.02|
|Bearing Length, Nominal (B)||4.000|
|OD Chamfer Length (Co)||0.500|
|ID Chamfer Angle (B deg.)||30|
|ID Chamfer Length (Ci)||0.500|
|Material||Molded plastic with self lubricating resins.|
|Tolerances and Precision|
|Fitting and Mounting|
|Load and Life Calculation Information|
|eDrawings file (.ePRT, eASM)|
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.