Home » Bearings Catalog » Bushings » ASTEPB Injection Molded Thermoplastic Series - Metric » ASTEPBW 4266-015

ASTEPBW 4266-015

Category: ASTEPB Injection Molded Thermoplastic Series - Metric

  1. This bearing can operate dry or with lubrication.
  2. Please review the technical information on the requirements for the mating shaft.
  3. See the ASTEPB Product information for the available materials.
  4. Recommended fitting tolerance: Housing = H7, Shaft = h9,
Attributes Values
Bearing Type thrust washer
Shaft Dia., Nominal (d) 40.0000
Bearing Outside Diameter, Nominal(Do) 66.000
Washer Inside Diameter, Nominal (di) 42
Washer Inside Diameter Tolerance (di tol.) +0.25 / -0.0
Washer Outside Diameter, Nominal (Do) 66
Washer Outside Diameter Tolerance (Do tol.) +0.0 / -0.25
Washer Thickness, Nominal (S3) 2
Washer Thickness Tolerance (S3 tol.) +0.0 / -0.05
Mounting Hole Dia. (dm) 4.000
Mounting Hole Pitch Dia. (dp) 54
Housing Counterbore Depth (Ha) 1.00
Housing Counterbore Depth Tolerance (Ha tol.) +0.2 / -0.2
Housing Counterbore Diameter, Nominal (HD) 66.000
Housing Counterbore Diameter Tolerance (HD tol.) +0.12 / -0.0
Material Molded plastic with self lubricating resins.
Additional Information
Tolerances and Precision
Internal Clearance
Fitting and Mounting
Load and Life Calculation Information
eDrawings file (.ePRT, eASM)
The information in AST Bearings herein is provided for informational purposes only. This information should not be relied upon for design, development or other purposes.
Contact AST Bearings for the most current product information as it applies to you and for your product information.