space
Bearing logo space
Reducing Friction to Keep
You in Motion
space
spaceAbout AST BearingsspaceBall Bearing ProductsspaceBall Bearing ServicesspaceAsk an enginner about ball bearingsspaceAST Bearings contactsspace
space Bearing Library Ball Bearing Events AST Bearings Locations AST Bearings Emploment
Miniature Bearings Metric

Open, Shielded and Sealed(6mm-9mm)

BEARING
NUMBER		 BORE OUTER
DIA.		 WIDTH
OPEN		 WIDTH
DOUBLE
SHIELDED
OR SEALED		 LOAD
RATINGS
(LBS.)		 RADIUS
INCHES

FLANGE
DIA.

FLANGE
WIDTH
OPEN

 FLANGE
WIDTH
SHIELDED		 WT.
(LBS.)
MM IN MM IN MM IN MM IN DYN STATIC
696 6 0.2362 15 0.5906 5 0.1969 5 0.1969 232 110 0.016 0.6693 0.0472 0.0472 0.009
606 6 0.2362 17 0.6693 6 0.2362 6 0.2362 340 163 0.012 0.7847 0.0472 0.0472 0.011
626 6 0.2362 19 0.7480 6 0.2362 6 0.2362 405 203 0.012 0.8661 0.0591 0.0591 0.018
MR117 7 0.2756 11 0.4331 2.5 0.0984 3 0.1181 53 22 0.008 0.4803 0.0236 0.0236 0.020
MR137 7 0.2756 13 0.5118 3 0.1181 4 0.1575 62 31 0.012 0.5991 0.0236 0.0315 0.005
687 7 0.2756 14 0.5512 3.5 0.1378 5 0.1969 203 104 0.012 0.6299 0.0394 0.0433 0.006
697 7 0.2756 17 0.6693 5 0.1969 5 0.1969 305 156 0.012 0.7480 0.0472 0.0472 0.025
607 7 0.2756 19 0.7480 6 0.2362 6 0.2362 390 195 0.012 0.8661 0.0591 0.0591 0.026
627 7 0.2756 22 0.8661 7 0.2756 7 0.2756 570 305 0.012 0.9843 0.0591 0.0591 0.029
MR128 8 0.3150 12 0.4724 2.5 0.0984 3.5 0.1378 62 31 0.012 0.5197* 0.0236 0.0315 0.005
MR148 8 0.3150 14 0.5512 3.5 0.1378 4 0.1575 93 44 0.012 0.6142 0.0315 0.0315 0.006
688 8 0.3150 16 0.6299 4 0.1575 5 0.1969 216 117 0.016 0.7087 0.0394 0.0433 0.007
698 8 0.3150 19 0.7480 6 0.2362 6 0.2362 325 156 0.012 0.8661 0.0591 0.0591 0.012
608 8 0.3150 22 0.8661 7 0.2756 7 0.2756 570 305 0.012 0.9843 0.0591 0.0591 0.026
628 8 0.3150 24 0.9449 8 0.3150 8 0.3150 435 219 0.012       0.033
689 9 0.3543 17 0.6693 4 0.1969 5 0.1969 229 128 0.016 0.7480 0.0394 0.0433 0.026
699 9 0.3543 20 0.7874 6 0.2362 6 0.2362 328 173 0.020 0.9055 0.0591 0.0591 0.030
609 9 0.3543 24 0.9449 7 0.2756 7 0.2756 582 305 0.012 1.0630 0.0591 0.0591 0.032
629 9 0.3543 26 1.0236 8 0.3150 8 0.3150 790 490 0.012       0.044
Available in 400 and DD type series stainless steel.
* This dimension increased by 0.0156” for shielded version.
Seals are available in PTFE, Buna-N-Rubber (contact and light contact) on most sizes.
Check for availability.
space
copyright