| PART
NUMBER |
(B)
BORE
DIAM. |
(D)
OUTSIDE
DIAM. |
(H)
OUTER
RING
WIDTH |
(W)
INNER
RING
WIDTH |
BALLS |
(E)
INNER
SHOULDER |
(C)
45° CHAMFER
INNER
RING I.D. |
(A)
45° CHAMFER
OUTER
RING O.D. |
+0.0000
-0.0005 |
+0.0000
-0.0005 |
+0.000
-0.005 |
+0.000
-0.005 |
NO. |
SIZE |
REF. |
+0.015
-0.000 |
+0.015
-0.000 |
| KSP3L |
0.1900 |
0.6250 |
0.203 |
0.245 |
13 |
3/32 |
0.256 |
0.005 |
0.016 |
| KSP4A |
0.2500 |
0.7500 |
0.219 |
0.281 |
12 |
1/8 |
0.328 |
0.005 |
0.016 |
| KSP5A |
0.3125 |
0.8125 |
0.234 |
0.297 |
14 |
1/8 |
0.389 |
0.015 |
0.016 |
| KSP6A |
0.3750 |
0.8750 |
0.250 |
0.313 |
15 |
1/8 |
0.462 |
0.016 |
0.016 |
| KSP3 |
0.1900 |
0.7774 |
0.270 |
0.297 |
12 |
1/8 |
0.297 |
0.005 |
0.022 |
| KSP4 |
0.2500 |
0.9014 |
0.335 |
0.484 |
13 |
9/64 |
0.396 |
0.005 |
0.032 |
| KSP5 |
0.3125 |
1.2500 |
0.375 |
0.558 |
13 |
3/16 |
0.567 |
0.015 |
0.032 |
| KSP6 |
0.3750 |
1.4375 |
0.469 |
0.620 |
13 |
7/32 |
0.612 |
0.015 |
0.032 |
| KSP8 |
0.5000 |
1.6875 |
0.500 |
0.620 |
16 |
7/32 |
0.796 |
0.015 |
0.044 |
| KSP10 |
0.6250 |
1.9375 |
0.625 |
0.813 |
14 |
9/32 |
0.922 |
0.015 |
0.044 |
 |
DIMENSIONS IN INCHES
For
non-military applications without cadmium plating.
*Teflon is a trademark of E.I. duPont de Nemours & Co.,
Inc.
For military applications with cadmium plating.
LOAD
RATINGS
PART
NUMBER |
STATIC
LIMIT
LOADS
LBS. |
DYNAMIC
RADIAL LOAD RATINGS
LBS. |
| RADIAL |
THRUST |
INNER
RACE
ROTATING |
OUTER
RACE
ROTATING |
| KSP3L |
550 |
100 |
550 |
480 |
| KSP4A |
900 |
200 |
900 |
770 |
| KSP5A |
1000 |
200 |
950 |
815 |
| KSP6A |
1120 |
200 |
1120 |
990 |
| KSP3 |
900 |
200 |
900 |
770 |
| KSP4 |
1410 |
300 |
1230 |
1230 |
| KSP5 |
2190 |
300 |
2190 |
1890 |
| KSP6 |
2980 |
400 |
2980 |
2580 |
| KSP8 |
3670 |
500 |
3670 |
3290 |
| KSP10 |
5320 |
600 |
4980 |
4360 |
|
|
|
Features:
- Removable Teflon®
seals
- Operating temperature
-65° to +250°F
- Lubricated in accordance
to MIL-G-81322
- Stainless steel also
available
- Custom sizes, tolerances,
radial clearances, lubrication, etc. available on request
|
These bearings are self-aligning for 10° in either direction
except KSP4A which are self-aligning for 8° in either
direction. They should not be used as track rollers, cam follower
rolls, and the like.
