PART NUMBER (B) BORE DIAM. (D) OUTSIDE DIAM. (H) OUTER RING WIDTH (W) INNER RING WIDTH BALLS (E) INNER SHOULDER DIAM. (C) 45° CHAMFER INNER RING I.D. (A) 45° CHAMFER OUTER RING O.D. +0.0000 -0.0005 +0.0000 -0.0005 +0.000 -0.005 +0.0000 -0.005 NO. SIZE REF. +0.015 -0.000 +0.015 -0.000 DW4K2 0.2500 0.6250 0.500 0.562 16 3/32 0.344 0.005 0.016 DW4K 0.2500 0.7500 0.750 0.875 14 9/64 0.435 0.005 0.016 DW4 0.2500 0.7500 0.750 0.875 24 1/8 0.375 0.005 0.016 DW5 0.3125 0.8750 0.813 0.938 26 9/64 0.472 0.005 0.016 DW6 0.3750 1.0625 1.063 1.188 24 3/16 0.576 0.005 0.016 DW8 0.5000 1.4375 1.375 1.500 22 17/64 0.715 0.005 0.032 DIMENSIONS IN INCHES For non-military applications without cadmium plating. *Teflon is a trademark of E.I. duPont de Nemours & Co., Inc. For military applications with cadmium plating. LOAD RATINGS PART NUMBER STATIC LIMIT LOADS LBS. DYNAMIC RADIAL LOAD RATINGS LBS. RADIAL THRUST INNER RACE ROTATING OUTER RACE ROTATING DW4K2 1400 500 1050 960 DW4K 2770 900 2070 1850 DW4 3750 1240 2650 2300 DW5 5140 1600 2600 2320 DW6 8440 2600 4220 3740 DW8 15520 4700 7610 6520    Features: Removable Teflon® seals Operating temperature -65° to +250°F Lubricated in accordance to MIL-G-81322 Stainless steel also available Custom sizes, tolerances, radial clearances, lubrication, etc. available on request