- These spherical plain bearings have a double fractured outer race, held together with retaining rings.
- The inner and outer rings are coated with molybdenum disulphide for reduced sliding friction.
- This spherical plain bearing has grooves and thru holes for relubrication.
- This spherical plain bearing has two plastic seals.
- This spherical plain bearing must be properly lubricated with grease.
Category: Steel on Steel Double Fracture - Metric
|Bearing Type||high mis-alignment, sealed|
|Bore Dia (d)||25.000||mm|
|Outer Dia (D)||68.000||mm|
|Outer Width (Bo)||28.000||mm|
|Inner Width (Bi)||40.000||mm|
|Dynamic Load Rating (Cr)||117,000||N|
|Static Load Rating (Cor)||590,000||N|
|Max. shaft corner radius, or 45 deg. chamfer (ch1)||0.60||mm|
|Max. housing corner radius, or 45 deg. chamfer (ch)||1.00||mm|
|Spherical Diameter (dk or Dk)||50.00||mm|
|Mis-alignment Angle (a deg.)||19||mm|
|Material||Inner and Outer ring made from 52100 Chrome steel, or equivalent|