- This spherical plain bearing has a two piece carbon steel outer ring with a PTFE composite liner, split circumfrentially, held together with screws, the inner ring is chrome plated.
- This spherical plain bearing requires grease lubrication. The inner ring / outer ring have a groove and holes.
- The bearing must be protected from dirt and contamination.
GEH100HCS Metric Series Steel on PTFE Composite Material Spherical Plain Bearing
|Bore Dia (d)||100.000||mm|
|Outer Dia (D)||150.000||mm|
|Outer Width (Bo)||67.000||mm|
|Inner Width (Bi)||71.000||mm|
|Dynamic Load Rating (Cr)||900,000||N|
|Static Load Rating (Cor)||1,800,000||N|
|Max. shaft corner radius, or 45 deg. chamfer (ch1)||1.00||mm|
|Max. housing corner radius, or 45 deg. chamfer (ch)||1.00||mm|
|Spherical Diameter (dk or Dk)||135.00||mm|
|Mis-alignment Angle (a deg.)||2|
|Material||Outer ring made from carbon steel, inner ring 52100 chrome steel or equivalent|