- The inner and outer rings are coated with molybdenum disulphide for reduced sliding friction.
- These spherical plain bearings have a single fractured outer race.
- This spherical plain bearing has grooves and thru holes for relubrication.
- This spherical plain bearing must be properly lubricated with grease.
Category: Metric Series
|Bore Dia (d)||200.000||mm|
|Outer Dia (D)||290.000||mm|
|Outer Width (Bo)||100.000||mm|
|Inner Width (Bi)||200.000||mm|
|Dynamic Load Rating (Cr)||2,120,000||N|
|Static Load Rating (Cor)||10,600,000||N|
|Max. shaft corner radius, or 45 deg. chamfer (ch1)||1.10||mm|
|Max. housing corner radius, or 45 deg. chamfer (ch)||1.10||mm|
|Spherical Diameter (dk or Dk)||250.00||mm|
|Mis-alignment Angle (a deg.)||4||mm|
|Extended Inner OD (d1)||221.00||mm|
|Material||52100 Chrome steel, or equivalent|