- This spherical plain bearing has a single fractured stainless steel outer ring with a PTFE fabric liner, the inner ring is stainless steel.
- This is a maintenance free bearing with a PTFE fabric liner, lubrication is not recomended.
- The bearing must be protected from dirt and contamination.
GE30ET_X Metric Series Stainless Steel on PTFE Fabric Material Spherical Plain Bearing
|Bore Dia (d)||30.000||mm|
|Outer Dia (D)||47.000||mm|
|Outer Width (Bo)||18.000||mm|
|Inner Width (Bi)||22.000||mm|
|Dynamic Load Rating (Cr)||110,000||N|
|Static Load Rating (Cor)||263,000||N|
|Max. shaft corner radius, or 45 deg. chamfer (ch1)||0.60||mm|
|Max. housing corner radius, or 45 deg. chamfer (ch)||0.60||mm|
|Spherical Diameter (dk or Dk)||40.70||mm|
|Mis-alignment Angle (a deg.)||6||mm|
|Material||Inner ring and outer ring made from stainless steel|